Manual Sample Cutter - SASD-688
Manual Sample Cutter
SASD-688
Building on the quality of the 3090 series the King Universal Manual Sample Cutter utilizes a durable cast construction and hardened steel dies. The unit features a high cutting force and cuts material up to ½” thick Samples are automatically ejected. The non-rotating head allows a variety of blade sizes and shapes. Cutter is supplied with 2.6974” diameter blade s standard. Larger samples can be cut, up to (3.2” x 3.2”).
Pneumatic Sample Cutter - SASD-692
Pneumatic Sample Cutter
The King Pneumatic Sample Cutter available in 5” or 6” diameter bore cylinders, provides 1960 or 2825 lbs of force (respectively) at 100PSI. Easily cuts through multiple fabric layers, using fewer standard fiber cutter pads than a manual cutter. Ejection device removes samples from cutting die. Completely air operated – no wiring required. Two hand control for safety. Regulator/filter provided. OSHA approved air supply shut off valve can be locked in “OFF” position. Standard models have “rotating” cylinders and round cutting dies. Models are available with non-rotating cylinders and rectangular dies.
Standard Models:
- PSC5R-AC 5” cylinder with 2.6974 inch diameter blade With sample ejector, cutting pad locating plate and box of 100 cutting pads
- PSC6R-AC 6” cylinder with 2.6974 inch diameter blade with sample ejector, cutting pad locating plate and box of 100 cutting pads.
- PSC5R-100 5” cylinder with 4.4424 inch diameter blade (for 100sq. cm sample)With sample ejector, cutting pad locating plate and box of 100 cutting pads.
- PSC6R-100 6” cylinder with 4.4424 inch diameter blade (for 100sq. cm sample)With sample ejector, cutting pad locating plate and box of 100 cutting pads.
Other Models of Pneumatic Cutters similar to above are available with round dies of special diameters as well as rectangular dies of special sizes. Rectangular dies require cutters with non-rotating cylinders.
Accessories:
| Cutting Blades/Dies | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
For more information call the J.A. KING Tailored for Textiles helpdesk at +866-802-6703 or email to Info.TextileTestKing@JAKing.com for a rapid response.
Tailored for Textiles
The Textile Test Equipment division of J.A. King & Co. has been serving the textile industry for over 50 years. We manufacture, supply and support a complete range of Textile Quality Control Instruments spanning Fiber and Yarn Testing, Fabric and Garment Testing as well as Consumable Products for all Textile Test Standards. We are accredited to ISO 17025 and can provide traceable calibration certificates with all of our products if required. We can also provide regular follow-up calibrations and service at our manufacturing facility in Whitsett, NC, or on site at your location. Famous for the unique King Cutter, which cuts up to 8 samples at one time, J.A. King & Co has developed some of the most accurate Fabric Yield Systems available today.
Click to Download Product Data Sheet
Click to Download Complete TFT Catalog
CALIBRATION LABS
LOCATIONS
