OPERATION: Selecting number of samples and units.

Note: Legend on right side of display will display "g" (grams) or "·" (custom unit). You can select one or the other the by using the OFF/MODE button on the CT200-6.

A. 8 samples, oz/sq. yd: Select the "g" (grams unit),toggle switch position does not matter.
B. 8 samples, g/sq. m: Select the "·" (custom unit) and move toggle switch (on front edge of unit) to the far left position (switch points toward "8 Sample g/sq. m" on label).
C. 1 sample, g/sq.m: Select the "·" (custom unit) and move toggle switch (on front edge of unit) to the center position (switch points toward "1 Sample g/sq. m" on label).
D. 1 sample, oz/sq. yd: Select the "·" (custom unit) and move toggle switch (on front edge of unit) to the far right position (switch points toward "1 Sample oz/sq. yd." on label).

Stability: Resolution in the "1" sample, g/sq. m mode is quite high. If display is not stable, it may be necessary to relocate the scale to an area of low vibration or to shield it from air currents (fans, air conditioners).

Note: If unit gets reset to factory settings, the "Custom Unit" will be lost. If this happens, place unit in "Grams" mode with toggle switch set to "8 samples, oz/sq. yd". Then use instruction book on CT200 to turn "ON" the "Custom Unit" and "enter" 3.3906, E1, D5.